Get Quote Now

 

 

What are your ideas regarding Hot Water Heater Repair?

Many modern-day houses take advantage of an electric hot water heater for their heating unit, as a result of its benefit and simplicity of use. However, much like any other electrical home appliances, problems might arise with its use, all of a sudden. It can be truly frustrating to get up to a cool shower instead of a warm one or having your bath with water that isn't warm adequate and even also hot. Whatever the situation may be, water heater troubles can be quite stressful. Fortunately, we've made a checklist of possible options to your water heater problems. There are a variety of factors that might create a lot of these troubles, it could be a problem with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you switch off the main power supply for security. Whatever the trouble is, getting it fixed ought to not present way too much of an issue if you comply with these actions:

 

Call A Professional:

If after replacing all malfunctioning components and resetting your temperature, the water heater still isn't functioning, you might need to get in touch with a professional plumber for an expert point of view. The problem with your heater could be that the hot and cold faucets have actually been switched over or it may be undersized for the amount of hot water required in your house. Whatever the instance may be, a professional plumber would assist fix the trouble.

 

Examine Your Power Supply:

As basic as this may seem, it is extremely needed. Without appropriate power, your hot water heater will certainly not function. So the first thing to do when your water suddenly stops working is to validate that it isn't a power problem. Check if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the problem, just turn it off and on once again. Change any type of damaged or damaged fuse. Test the appliance with power after these modifications to see if it's now working.

 

Inspect Your Thermostat:

If your water heater still isn't working or the water coming out isn't hot enough, you may need to check the temperature settings on your upper thermostat. Ensure the breaker is switched off before doing anything. Open the access panel and also press the red switch for temperature level reset over the thermostat. This must assist heat up the water. Turn the circuit breaker back on and also inspect if the issue has been resolved.

 

Examine the Burner in the Water Heater:

If it's not a power problem, after that attempt taking a look at your heating element if it is still functioning. Check each of your heating elements to be sure the trouble isn't with any one of them. If any of them is faulty, change that part and afterwards inspect whether the hot water is back on.

 

Conclusion

Hot water heater issues are not always significant. A number of them are due to small problems like a blown fuse or worn-out burner. Replacing the faulty components ought to do the trick. Nevertheless, if you are still unable to address the problem, give a call to your local plumber to find to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

As an avid person who reads on Hot Water Heater Repair, I imagined sharing that excerpt was beneficial. Are you aware of somebody else who is inquisitive about What Would Cause My Electric Water Heater to Stop Working?? Why not share it. Thank you for your time. Visit again soon.

Click For More Info